camshaft
英['kæmʃɑːft]
美['kæmʃæft]
- n. 凸轮轴
详细释义
Noun:
-
has cams attached to it
双语例句
- 1. Other possible reasons include problems with the oil pump, rod and main bearing clearances, camshaft stopping playing, or cam bearings and lifters.
- 其他可能的原因包括油泵问题、杆和主轴承的空隙、凸轮轴停止工作、或者凸轮的方位和升降。
youdao
- 2. Install cover for camshaft housing.
- 安装凸轮轴室盖。
youdao
- 3. The camshaft has a cam, on which there is a lob, or bump.
- 凸轮轴上有一个凸轮，凸轮上有一个凸角。
youdao
- 4. In its initial stage the change-of the camshaft is performed.
- 在他的初始阶段凸轮轴的转换被执行。
youdao
- 5. Camshaft is one of the important parts on the automobile engine.
- 凸轮轴是汽车发动机的重要零件。
youdao
- 6. The eccentric may be part of the camshaft itself or may bolt to it.
- 偏心轮可能与凸轮轴是一体的，也可能是通过螺钉连接的。
youdao
- 7. Since 1958, an engine with a single overhead camshaft has been used.
- 从1958年起，便已使用带有单顶置凸轮机的发动机。
youdao
- 8. The isothermal quenching process of the ductile iron camshaft was analyzed.
- 对球铁凸轮轴的等温淬火工艺进行了分析。
youdao
- 9. Camshaft from the crankshaft through the timing belt or gear or chain drive.
- 凸轮轴由曲轴通过齿形带或齿轮或链条驱动。
youdao
- 10. The value-opening mechanism includes a valve lifter and a CAM on a camshaft.
- 一套气门开启机构包括一个气门挺杆和一个在凸轮轴上的凸轮。
youdao
- 11. The value-opening mechanism includes a valve lifter and a cam on a camshaft .
- 一套气门开启机构包括一个气门挺杆和一个在凸轮轴上的凸轮。
youdao
- 12. The camshaft also fits inside the block, except on overhead-cam engines (OHC).
- 除了顶置凸轮（OHC）发动机以外，凸轮轴都安装在气缸体里面。
youdao
- 13. Therefore, the camshaft must revolve at exactly half the speed of the crankshaft.
- 因此，凸轮轴必须以曲轴正好一半的速度旋转。
youdao
- 14. It's connecting methods are the key technology in assembling camshaft production.
- 而其连接方法是装配式凸轮轴制造的关键技术。
youdao
- 15. Remove the camshaft retaining bolt and remove the sprockets and chain as an assembly.
- 拆去凸轮轴固定螺栓，并拆去作为一个总成的链轮和链条。
youdao
- 16. Rocker arm, Rocker arm shaft, Rocker assembly, Valve guide tube, Camshaft bearing Cap.
- 气门摇臂，摇臂轴，摇臂总成，气门导管，凸轮轴盖。
youdao
- 17. When you increase the RPM, however, this configuration for the camshaft does not work well.
- 当您增加转速时，但这种配置的凸轮轴不工作。
youdao
- 18. The key technology of hollow assembled camshaft is joint between the shaft and the cam lobes.
- 中空装配式凸轮轴的技术关键为凸轮和轴体之间的连接。
youdao
- 19. The mechanical fuel pump is used on many vehicles with carburetors and driven by the camshaft.
- 机械驱动燃油泵用于许多化油器式车辆，它由凸轮轴驱动。
youdao
- 20. Applied to ductile iron crankshaft, camshaft and other parts of the grinding and other grinding.
- 适用于球墨铸铁曲轴，凸轮轴等工件的磨削及其它磨削。
youdao
- 21. The metal shaft, called the camshaft, typically has individual cams for each valve in the engine.
- 那金属轴叫凸轮轴，翣在发动机里的每个气门一般有各自的凸轮。
youdao
- 22. The metal shaft, called the camshaft, typically has individual cams for each valve in the engine.
- 那金属轴叫凸轮轴，在发动机里的每个气门一般有各自的凸轮。
youdao
- 23. One centrally located camshaft per cylinder bank is driven by a fiberglass-reinforced toothed belt.
- 一个位于中央的每缸银行是由凸轮轴驱动的玻璃纤维增强型齿形带。
youdao
- 24. Using the so-called hall effect the hall sensors determine the position of the respective camshaft.
- 利用所谓的霍尔效应，霍尔效应传感器可确定各凸轮轴的位置。
youdao
- 25. The timing is controlled by the camshaft which is synchronized to the crankshaft by a chain or belt.
- 凸轮轴通过皮带链接与机轴保持同步，准确控制了可燃气体的进出时间。
youdao
- 26. The front of the cylinder head is also equipped with oil galleries to supply the intake camshaft VVT.
- 气缸头的前部还装有油画廊供应量凸轮轴可变配气相位。
youdao
- 27. In the engine, oil is supplied to crankshaft and camshaft journals rotating in their supporting bearings.
- 在发动机里，机油被供应到旋转在其支承轴内的曲轴和凸轮轴轴颈上。
youdao
- 28. A system of automated NC camshaft grinding machine with moderate price and high capability was developed.
- 为此，开发了一套价格适中的高性能数控凸轮磨床控制系统。
youdao
- 29. Allows faster pumping of oil to the bearings and camshaft for greater protection when starting your engine.
- 当您启动发动机的时候，可以更快地把机油泵送到轴承和凸轮轴上，从而能够更迅速地保护发动机。
youdao
- 30. Allows faster pumping of oil to the bearings and camshaft for greater protection when starting your engine.
- 当您启动发动机的时候，可以更快地把机油泵送到轴承和凸轮轴上，从而能够更迅速地保护发动机。
youdao
- This is called an overhead camshaft arrangement.
这被叫为顶置凸轮轴装置。 - The eccentric may be part of the camshaft itself or may bolt to it.
偏心轮可能与凸轮轴是一体的，也可能是通过螺钉连接的。
用作名词 (n.)
用法讲解
- camshaft sleeve 凸轮轴衬套
- breaker camshaft 断路器凸轮轴...
- camshaft sprocket 凸轮轴链轮
- camshaft gear 凸轮轴齿轮
- camshaft grinding machine 凸轮轴磨床
- camshaft drive 凸轮轴传动装置...
- camshaft cover 凸轮轴盖
- camshaft bearing 凸轮轴轴承
- camshaft bush 凸轮轴轴衬
- camshaft case 凸轮轴箱
- serrated camshaft 凸轮花键盘
- camshaft controller 凸轮轴控制器...
- camshaft control 凸轮轴操纵
- camshaft wedge 凸轮轴楔
- camshaft speed 凸轮轴转速
- brake camshaft 制动凸轮轴
- camshaft housing 凸轮轴箱,分配轴箱...
- camshaft casing 凸轮轴壳
- camshaft lathe 凸轮轴车床
- camshaft nut 凸轮轴螺母
相关词汇
大家正在查
Copyright © 2023 256查询网 All Rights Reserved
