countersunk
英['kaʊntəsʌŋk]
美['kaʊntərsʌŋk]
- vt. 钻孔
- adj. 埋头的
详细释义
名词 countersink:
-
a hole (usually in wood) with the top part enlarged so that a screw or bolt will fit into it and lie below the surface
-
a bit for enlarging the upper part of a hole
双语例句
- 1. Top view of countersunk slotted screw.
- 圆头一字槽螺钉的俯视图。
youdao
- 2. Top view of countersunk slotted screw.
- 方头螺钉的俯视图。
youdao
- 3. Hexalobular socket countersunk head tapping screws.
- 沉头内六角攻丝螺钉。
youdao
- 4. Name two head styles of machine screws that are countersunk.
- 沉头机螺钉有哪两种头型？
youdao
- 5. Hexagon socket head cap screws with countersunk head screws like.
- 角紧顶螺钉固定在底座上。
youdao
- 6. Countersunk rivet symbol. Use in conjunction with other rivet ends.
- 埋头铆钉符号。与其他铆钉端点结合使用。
youdao
- 7. Side view of raised countersunk posidriv screw with adjustable thread length.
- 螺纹长度可调整的半埋头十字槽螺钉的侧面图。
youdao
- 8. Top view of countersunk slotted screw. Selection box represents thread diameter.
- 埋头一字槽螺钉的俯视图。选择框代表螺纹直径。
youdao
- 9. Features Rapid and simple calibration-setting master for plain and countersunk holes provided with each gage.
- 特点快速简便的校准-每一款孔规为使用者提供普通孔和盲孔进行校准设置。
youdao
- 10. In the countersunk caseless cartridge, the burning at ignition allied to the matching of charge configuration.
- 埋头无壳弹的点火、烧与装药结构的相互匹配有着十分密切关系。
youdao
- 11. Specification: flat head cold-flow model, countersunk head cold-flow model, primary drawing mould, pole-shorten model, etc.
- 规格：平头冷墩模、沉头冷墩模、一序冲顶模、缩杆模等。
youdao
- 12. Rod guide, for 8mm round rods. Screwed onto a welded stud or countersunk screw. Lower version (200-3606.3) also as shown in the samples of application.
- 圆柱杆的连杆导槽，旋在焊接螺钉或埋头螺钉上。应用示例图中还画出了较低型（200-3606.3）
youdao
- 13. The front cover exactly matches this shape and also has a raised circular area that fits into a matching countersunk area of the block in front of the main bearing.
- 封面完全匹配这个形状和也提出了圆形区域，可以成为一个匹配埋头面积块前面的主轴承。
youdao
- 14. Baosteel should not only "countersunk cart", even want "looking up at the sky" to adjust the thinking, strategy and the corresponding program, so as to adapt to these changes.
- 宝钢不仅要“埋头拉车”，更要“抬头看天”，及时调整思维、策略和相应的规划，以适应这种变化。
youdao
- 15. By removing the four countersunk screws that maintain exact alignment, the orientation of the piston rods and tooling plate can be rotated 90 degrees without cylinder disassembly.
- 通过消除四个埋头螺丝保持精确一致，该活塞杆和模具板可旋转方向没有拆卸气缸90度。
youdao
- 16. By removing the four countersunk screws that maintain exact alignment, the orientation of the piston rods and tooling plate can be rotated 90 degrees without cylinder disassembly.
- 通过消除四个埋头螺丝保持精确一致，该活塞杆和模具板可旋转方向没有拆卸气缸90度。
youdao
用法讲解
- oval countersunk screw 椭圆埋头螺钉...
- countersunk hole 埋头螺孔
- countersunk screw 埋头螺丝,埋头螺钉...
- countersunk head 埋头钉
- countersunk lug block 平头带耳块
- countersunk head rivet 埋头铆钉
- countersunk seat 沉头座
- countersunk spigot 锥形轴颈,埋头轴颈...
- countersunk bolt 埋头螺栓
- countersunk nut 埋头螺帽
- countersunk rivet 沉头螺钉,埋头铆钉...
- countersunk head screw 埋头螺钉
- countersunk head bolt 埋头螺栓
- countersunk washer 埋头垫圈
- countersunk collar 埋头轴环
相关词汇
大家正在查
Copyright © 2023 256查询网 All Rights Reserved
