ingot steel
英
美
- 锭钢
双语例句
- 1. Keeping pouring quality would prevent the ingot steel from forging bursting.
- 为避免此类缺陷产生，必须保证钢锭的浇注质量。
youdao
- 2. A steel mill's ingot goes into a sedan or a skyscraper, but not both.
- 炼钢炉炼出的钢材可能用来造小轿车或者摩天大楼，但不可能一块钢材两个都造。
youdao
- 3. Cargoes like grain, crude oil, ingot aluminium, steel and automobiles are shipped bulk or grains, with only minimal parking.
- 像谷物、原油、铝锭、钢和汽车等货物以散装形式运输或只进行最低程度的包装。
youdao
- 4. This paper has theoretically studied the effect of blowing Ar into molds on improving killed steel ingot quality.
- 本文从理论上分析了采用锭模吹氩对提高镇静钢质量的作用。
youdao
- 5. A new method to simulate directly and predict the formation process of shrinkage cavity, its final shape and position for steel castings and ingot was proposed using computer.
- 提出了可用计算机直接模拟钢铸件、铸锭缩孔形成过程及最终形状和位置的直接模拟法。
youdao
- 6. So less gas is. given off in the mould than with rimming steel, but enough bubbles form at the top of the ingot to counteract most of the shrinkage.
- 所以，在钢锭模内析出的气体没有沸腾钢多，但又在钢锭头产形成足够的气泡抵消大部分钢的收缩。
youdao
- 7. It is suitable for the grinding of steel ingot, removing burrs of casting, precision grinding of stones, cutting and polishing. But it should be kept away from alkaline solution.
- 适用于磨钢锭、铸件打毛刺、石材表面精加工、切割、抛光等。但该类磨具不抗碱性溶液。
youdao
- 8. In seawater and fresh water, the performance of ingot and 35 steel was measured by constant current experiment, and then their anodic polarization curves were drawn.
- 利用恒电流试验测试了工业纯铁和35钢在海水和淡水中的牺牲阳极性能，利用电流阶跃阳极极化法测试了二者在海水和淡水中的极化性能。
youdao
- 9. The ingot annealing technology in some alloying steel plant have been investigated.
- 调查分析了一些特殊钢厂的钢锭退火工艺规范。
youdao
- 10. As a result, it is possible to get a better discharge flow in the feeding zone of the ingot mold where the discharge device of molten steel is placed, in addition to less turbulence.
- 结果，除了湍流更少之外，还可以在锭模的进给区域获得更好的排放流，熔化钢铁的排放装置位于该进给区域。
youdao
- 11. This paper introduces how to apply discrete system emulation method to establish a system emulation model from casting to rolling for steel ingot based on production data.
- 介绍了如何采用离散型系统仿真力法，以生产实际数据来建立钢锭从浇注到轧制过程的系统仿真模型的做法。
youdao
- 12. By comparison with manual arc welding, it is found that the thermit welding is a efficiency, energy saving and high quality process for repair welding of steel ingot die.
- 根据对比铝热焊与手弧焊修复工艺，阐明了用铝热焊修复钢锭模是一种高效、节能、焊接质量好的新方法。
youdao
- 13. I have seen one of the conventional steelworks: huge blast furnace, converter, steel ingot, miles of railway track.
- 我参观过传统的炼钢厂：巨大的高炉、转炉、钢锭，长达几英里的铁轨。
youdao
- 14. I had saw one of the conventional steelworks: huge blast furnace, converter, steel ingot, mile of railway track.
- 我参观过传统的炼钢厂：巨大的高炉、转炉、钢锭，长达几英里的铁轨。
youdao
- 15. Increasing the utilization ratio of the steel ingot is an important way to reduce the forging cost.
- 提高钢锭的利用率是降低锻件成本的重要途径之一。
youdao
- 16. To obtain the high-quality forged steel ingot, it must control the ingot solidification process.
- 要获得锻造所需的优质钢锭，就必须控制钢锭的凝固过程。
youdao
- 17. Therefore, both quality of steel ingot and yield are considered synthetically.
- 因此，在进行钢锭模设计时，应综合考虑钢锭的质量和成材率。
youdao
- 18. According to this, the formation mechanism on hot charging process crack of steel ingot is concluded, thus offering a theoretical basis for preventing hot charging process crack in production.
- 在此基础上分析了钢锭红送裂纹的形成机理，为生产中防止产生红送裂纹提供了理论依据。
youdao
- 19. In order to prevent the molten slag on the top of the steel from entering the ingot moulds, the steel is poured from the bottom of the ladle.
- 为了防止浮在钢液表面上的熔渣进入钢锭模，钢液从盛钢桶底部放出。
youdao
- 20. It is split that electricity amasses the golden silver mud on steel cotton to use chemical method. The gold mud is smelted become alloy. after smelting, silver mud can get the silver ingot of 98%.
- 电积到钢棉上的金银泥用化学方法进行分离，金泥经熔炼后得合质金，银泥熔炼后可得98%的银锭。
youdao
- 21. The steel ingot with qualified components, a good crystalline structure and pure interior can be produced by using the process which provides a good condition for smithing.
- 采用本工艺可以生产出成分合格，结晶组织优良，内部纯净的钢锭，为锻造创造良好的条件。
youdao
- 22. Although the numerical simulation of steel ingot solidification process of research, some progress is being made, but there are still many problems.
- 虽然在钢锭凝固过程的数值模拟研究方面，目前取得了较大的进展，但仍存在不少问题。
youdao
- 23. This paper researches into the mechanisms of chain cleaning machine for both cylindrical and rectangular steel ingot model.
- 探讨了链条清理圆柱钢锭模和矩形钢锭模的机理。
youdao
- 24. The invention provides the ingot mould and the casting method which solve a problem that crackles are produced during a process of casting the round steel ingots.
- 本发明提供了一种解决圆钢锭浇铸过程中产生裂纹的钢锭模及其浇铸方法。
youdao
- 25. Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron and Wrought Iron.
- 碳素钢，低合金钢，硅电炉钢，铁锭和熟铁的化学分析的测试方法。
youdao
- 26. Some CO gas remains in the ingot, and eventually blow holes are formed in the steel.
- 部分一氧化碳气体残留在钢锭内部，最终在钢中形成气泡。
youdao
- 27. Advantages: it can destroy the ingot casting, steel grain refinement, and eliminating the defect in microstructure, thus making steel tissue close-grained, with improved mechanical properties.
- 优点：可以破坏钢锭的铸造组织，细化钢材的晶粒，并消除显微组织的缺陷，从而使钢材组织密实，力学性能得到改善。
youdao
- 28. Effect of ultrasonic treatment on the porosity of high carbon steel ingot was investigated.
- 研究了超声处理对高碳钢铸锭内气孔的影响。
youdao
- 29. Effect of ultrasonic treatment on the porosity of high carbon steel ingot was investigated.
- 研究了超声处理对高碳钢铸锭内气孔的影响。
youdao
相关词汇
大家正在查
Copyright © 2023 256查询网 All Rights Reserved
