isoparametric
英[aɪsəʊ'pærə'metrɪk]
美[aɪsoʊ'pærə'metrɪk]
- adj. 等参数的
双语例句
- 1. The quadrilateral area coordinate is adopted instead of the isoparametric coordinate.
- 采用四边形面积坐标来代替等参坐标。
youdao
- 2. The algorithm is available for linear triangular isoparametric elements.
- 该算法适用于三角形线性等参元。
youdao
- 3. One is isoparametric spiral machining, and the other is channel spiral machining.
- 另一种是通道螺旋加工方法。
youdao
- 4. Isoparametric element of arbitrary hexahedron plays an important role in finite element analysis.
- 等参数任意六面体单元在有限元分析中有着重要的作用。
youdao
- 5. Traditional isoparametric elements are usually sensitive to various curved or straight edge mesh distortion.
- 目前普遍采用的传统等参元族对网格的曲边、直边畸变均十分敏感。
youdao
- 6. The dynamic analysis of this small substructure system was made by FEM with quadrilateral isoparametric elements.
- 用等参数有限元法对这个小结构系统进行动力分析。
youdao
- 7. Methods 1223 nodes, 764 8-node hexahedron isoparametric elements and 3564 freedom degrees were used in FEM analysis.
- 方法有限元分析中采用了1223个节点、764个八节点六面体等参元和3564个自由度。
youdao
- 8. By Using the tension spline function, a type of twelve-nodes tension isoparametric finite element has been constructed.
- 本文利用张力样条函数，构造了一种十二节点张力等参有限单元。
youdao
- 9. Researching the method of isoparametric to creat the tool path, and through post-processing generate a reasonable NC code.
- 系统的研究了等参数线法的刀具轨迹技术方式，并通过后置处理生成了合理的NC代码。
youdao
- 10. In this paper, four-nodal isoparametric element program DDKEPL by using Duncan's nonlinear-elastic model for soil is presented.
- 本文对土体采用邓肯-张非线性弹性模型编制了四节点等参元有限元程序ddkepl。
youdao
- 11. Applying degenerate isoparametric element, this paper has studied geometrical nonlinear response of composite plates and shells.
- 本文采用退化的等参壳元分析了复合材料板、壳结构的几何非线性特性。
youdao
- 12. In addition, the article also discusses the usage of isoparametric element for solving temperature distribution in heat conduction.
- 此外，还讨论了应用这种等参数单元求解热传导温度场分布的方法。
youdao
- 13. By comparing the numerical solutions with the analytical solutions, it is proved that the isoparametric graded finite elements are useful.
- 针对功能梯度材料这种新型材料，提出了采用等参梯度元建立有限元模型的方法。
youdao
- 14. A 3-d isoparametric joint element with spherical surface key grooves of finite thickness is used to simulate transverse joints of arch dam.
- 采用三维有限厚度带球面键槽接缝单元模拟拱坝横缝，推导了球面键槽的接触物理方程，探讨了球面键槽的最优中心角。
youdao
- 15. There is no explicit formulation of inverse mapping about the isoparametric element, so inverse mapping is avoided in finite element analysis.
- 由于等参元不存在逆变换的显式，所以在有限元分析的列式中都回避等参元逆变换。
youdao
- 16. The key of plotting colored patterns of high order isoparametric elements is to calculate the nature coordinates of pixels spanned by elements.
- 画高次等参单元彩色云图的关键是计算单元覆盖像素的自然坐标。
youdao
- 17. Methods A three-dimensional finite element model of the nasomaxillary complex was created, consisting of 1638 isoparametric elements and 1827 nodes.
- 方法采用三维有限元法测量受不同方向的后牵引力的鼻上颌复合体三维有限元模型。
youdao
- 18. Numerical results coincide with theoretical analysis. That the modified isoparametric element displays a lot of better characteristics is also shown here.
- 数值结果与理论分析一致，并展示了修改等参元的许多优良特性。
youdao
- 19. The correlation between compatible and incompatible isoparametric elements was proved by applying some restrictions to the generalized degrees of freedom.
- 并通过对广义自由度施加一定约束，证明了协调等参元与非协调元之间存在的对应性。
youdao
- 20. The convergence of hexahedral isoparametric element of form (2) is analysed in this paper, then the optical interpolation error estimation of it is obtained.
- 研究了(2)型等参六面体元，分析了其收敛性并给出了最优插值误差估计。
youdao
- 21. In this paper, the boundary element method for calculating surface crack is studied and suitable location or the singular isoparametric elements, is presented.
- 本文研究了计算半随圆表面裂纹应力强度因子的边界元方法。
youdao
- 22. In this paper, comprehensive theoretical and experimental study have been carried out on GB1236—85 acoustics cavity. A twenty node isoparametric element is developed.
- 本文以GB12 36— 85风室式实验台为具体对象，对封闭空间的声学特性进行了深入的理论分析和实验研究，提出采用“二十结点三维气体有限元”的方法。
youdao
- 23. In this paper, the isoparametric elements method based on the theoretical foundation of using two scalar potentials to calculate 3d magnetostatic field is introduced.
- 本文以双标量位法计算三维恒定磁场为理论基础，引入等参元有限元法。
youdao
- 24. The calculation on typical examples by 20-node isoparametric elements show the results obtained from these two methods have good accuracy and coincide with each other.
- 利用20节点等参单元对典型例题所作的计算表明，两种方法的结果均有较好的精度，并且互相比较吻合。
youdao
- 25. Geometric dichotomy method is innovated and used for inverse isoparametric mapping in linear finite element, of which a property is proved and served as the foundation.
- 在证明线性等参单元的一个几何特性的基础上，提出了线性等参单元逆变换的几何二分法。
youdao
- 26. The displacement boundary values of the small model use the results of the large model, which are obtained by interpolating with numerical inverse isoparametric mapping.
- 二次细分网格位移边界值采用等参逆变换法由一次网格的计算结果插值得到。
youdao
- 27. Functional graded material is a new material. Isoparametric graded finite elements are used for building the corresponding model for functional graded material in this paper.
- 针对功能梯度材料这种新型材料，提出了采用等参梯度元建立有限元模型的方法。
youdao
- 28. An isoparametric finite element program of large elastic-plastic strain (LEPS) is used to analyse the necking of a cylindrical bar and a plate specimen under uniaxial tension.
- 本文用弹塑性大应变问题的等参数有限元分析程序(LEPS程序)，对平板和圆棒试件的颈缩作了较全面的分析。
youdao
- 29. By using 3-d isoparametric element, the global stiffness matrix equation for the piezoelectric laminate is obtained on the bases of minimum principle of total potential energy.
- 由于最小势能原理，建立了单元刚度矩阵和压电材料的整体刚度方程。
youdao
- 30. Secondly, the global coordinates and stress values of the points are calculated by using standard isoparametric interpolations, the node coordinates and the known node stresses.
- 第二，用单元的结点坐标、结点应力以及等参插值函数，插值计算这些点的总体坐标及应力。
youdao
相关词汇
大家正在查
Copyright © 2023 256查询网 All Rights Reserved
