kerf
英[kɜːf]
美[kɜːf]
- n. 劈痕；截口；切口
双语例句
- 1. That slot left in the wood after a saw goes through is called the kerf.
- 锯过木头后留下的锯缝就叫做kerf。
youdao
- 2. Optimize further for equipment, raise kerf ability to lay a foundation.
- 为设备进一步优化，提高割缝能力奠定基础。
youdao
- 3. Range of kerf width and exposure may be changed for optimized performance.
- 一系列的切缝宽度和曝光可能会改为优化的表现。
youdao
- 4. Can cut conductive material in wantonly shape, get good kerf and smooth edge;
- 对各种导电材料可随意形状进行切割，可得到优良的切口和平整的表面；
youdao
- 5. The effects of laser process parameters on kerf width and quality were studied.
- 系统研究了工艺参数对切缝宽度和切缝质量的影响规律。
youdao
- 6. As a bonus, in researching this little factoid I discovered a new word I hadn't known before; kerf.
- 我在查询这个小词的时候，额外地发现了一个我以前不知道的新词：kerf。
youdao
- 7. And some thin kerf, but also are less likely to cut stone, cut so thin because of the stones will fracture stone.
- 而有些薄壁，也不太可能削减石，切割，因为薄的石头会断裂石材。
youdao
- 8. The results show that kerf width decreases with pulse frequency increases under the same average power and pulse width.
- 结果表明，当平均功率和脉冲宽度相同时，切缝宽度随着脉冲频率的增大而减小；
youdao
- 9. Laser cutting head coming with automatic touching system, adapt to the jagged materials and keep cutting kerf precision.
- 激光切割头配有自动高度跟随系统，适应材料高低不平，保证切割刀缝一致。
youdao
- 10. The results showed that the kerf width increases with the increase of the power density, pulse frequency and pulse width;
- 结果表明，缝宽随激光功率密度、频率以及脉宽的增加而加大；
youdao
- 11. The kerf is the outside boundary of the tunnel wall that a boring machine gouges out as it bores through the ground or rock.
- 切口在隧道壁边界的外面，隧道壁是由钻机在钻透土地或岩石时挖出的。
youdao
- 12. New clamping systems, low noise tooling, thin kerf saw blades, update cutters and their application were introduced in the paper.
- 本文将着重阐述刀具装夹、低噪声刀具、薄锯路圆锯片、新型刀具及应用。
youdao
- 13. In the same of average power, peak power and duty cycle constant, pulse width is the primary parameter which affects the kerf width.
- 在相同的平均功率、峰值功率和脉宽比下，脉冲宽度是影响切缝宽度主要参数。
youdao
- 14. An experimental study is presented to investigate the effects of cutting conditions on kerf geometry with variable process parameters.
- 采用连续改变激光切削参数的方法，研究了切割条件对切口形状和尺寸的影响及切口控制方法。
youdao
- 15. At last, the authors give a compensation principle for dimensional accuracy control of grooving kerf width with laser beam for seamless pipe.
- 最后提出了管材激光割缝时槽宽尺寸精度控制的补偿原则。
youdao
- 16. To reduce the kerf width and to improve the kerf quality, the experiments of ceramic cutting with water constricted plasma arc are carried out.
- 为减小切口宽度，提高切口质量，进行了水再压缩等离子弧切割陶瓷实验研究。
youdao
- 17. This system is applied to the profile lining and cutting robot system, which improves the precision of lining and cutting and makes the kerf smooth.
- 将该系统应用于船用型材划线切割机器人系统中，提高了划线和切割精度，且切口平整。
youdao
- 18. In order to reduce the kerf width and improve the kerf quality, the hydromagnetically confined plasma arc was used to cut engineering ceramic plates.
- 为减小陶瓷板件切口宽度，提高切口质量，采用水箍和磁场对附加阳极等离子弧进行综合二次约束。
youdao
- 19. Phenomenon of erosion delay in forming kerfs by abrasive waterjet will cause kerf incline in straight cutting or kerf taper in circular cutting process.
- 磨料水射流加工在切口形成过程中出现冲蚀延时现象，从而在直线切割时形成切口斜度，在圆形零件切割时形成切口锥度。
youdao
- 20. The wire sawing process has been applied to slice single silicon into thin wafers for its character of minimum warp, uniform thickness and low kerf loss.
- 由于线锯切割具有切片薄、表面翘曲变形小、厚薄均匀和切口损失小等优点，被广泛用于单晶硅切片加工。
youdao
- 21. Based on the theory of rock mechanics that applied in country rock kerf, and using bolt support can remove the heave of bottom, which gets good effect in practice.
- 施工中应用巷道围岩切缝法的岩石力学理论分析，采用锚杆支护法解决底板臌起现象，收到良好效果。
youdao
- 22. The effects on kerf width and quality made by laser facula diameter, focal point position, cutting speed, laser power and other technological parameters were studied.
- 研究了激光光斑直径及离焦量、切割速度、激光功率等工艺参数对齿轮切缝宽度及加工质量的影响。
youdao
- 23. As a bonus, in researching this little factoid I discovered a new word I hadn't known before; kerf. When you cut up a log into boards the thickness of your saw matters.
- 我在查询这个小词的时候，额外地发现了一个我以前不知道的新词：kerf .当你要把一根原木切割成一块块木板时，你的锯的厚度很关键。
youdao
- 24. The novel ring is characterized in that a kerf is arranged on the original ring, and the primary snap ring and the secondary snap ring are arranged at two ends of the kerf.
- 本实用新型提供一种由戒指和子母扣环组成的新型戒指环，其特征是：在原有的戒指上设置断口，断口两端设置有子母扣环。
youdao
- 25. At last, the authors regard that variable parameters are necessary for people to adopt in order to obtain a uniform kerf width for thin seamless steel pipe with a small diameter.
- 最后提出，为了获得均匀宽度的圆周切缝，对于薄壁小管径无缝钢管激光切缝，应采取变工艺参数的措施。
youdao
- 26. The basic principle, test device, and the regularity of cutting parameters affecting to the arc characteristics, kerf width, kerf Angle, and dross free cutting speeds are dealt with.
- 内容涉及基本原理、实验装置及加工参数对弧柱特性、切口宽度、切口角、无渣切速的影响规律。
youdao
- 27. The results show that the kerf width increases with the increase of laser power, pulse frequency, pulse width and assist gas pressure, but decreases with the increase of cutting speed.
- 结果表明：缝宽随输出功率、频率、脉宽及辅助氧压的增大而增加，随着切割速度的增加而减小。
youdao
- 28. This is achieved by using a unique multi beam technology, demonstrated in figure 2, which reduces the power density, minimizes the thermal load, and reduces the kerf width in the wafer.
- 这是采用独特的多光束技术实现的，图2显示了其工作原理，降低了功率密度，减小了热负载，缩小了刻线宽度。
youdao
- 29. The technology has the advantages of thin kerf, increased cutting speed, good quality, elimination of hazardous waste slurry and ability to machine harder brittle and bigger dimension materials.
- 该技术具有切缝窄、锯切效率高、切片质量好、对环境污染小、能加工大直径工件和超硬材料等优点。
youdao
- 30. The technology has the advantages of thin kerf, increased cutting speed, good quality, elimination of hazardous waste slurry and ability to machine harder brittle and bigger dimension materials.
- 该技术具有切缝窄、锯切效率高、切片质量好、对环境污染小、能加工大直径工件和超硬材料等优点。
youdao
用法讲解
- drag of kerf (气割)切缝(的)痕...
- bottom kerf 底槽
相关词汇
大家正在查
Copyright © 2023 256查询网 All Rights Reserved
