machining
英[mə'ʃiːnɪŋ]
美[mə'ʃɪnɪŋ]
- n. 加工
- 动词machine的现在分词.
详细释义
动词 machine:
-
turn, shape, mold, or otherwise finish by machinery
-
make by machinery
双语例句
- 1. It will save considerable machining time to use more than one tool in one machine to perform several machine operations either in sequence or simultaneously.
- 在一台机器上使用数种刀具来顺次或同时进行几项机器操作，将节省大量加工时间。
《新英汉大辞典》
- 2. He observed when people were machining cannon barrels, a lot of heat was generated, and there was a lot of work done.
- 他发现人们在制作炮管时，会产生大量的热，同时有大量的做功。
youdao
- 3. David: What is a machining center, Lisa?
- 大卫：加工中心是什么，丽莎？
youdao
- 4. Inspection machining dimension of rudder stock.
- 舵杆机加工尺寸检查。
youdao
- 5. The workers are machining parts for the engines.
- 工人们正在用机器为发动机加工零件。
youdao
- 6. We don't do any fabricating, building or machining.
- 我们不会做任何编造、建筑或加工。
youdao
- 7. Vibratory tapping is a new kind of machining method.
- 振动攻丝是一种新型的加工方法。
youdao
- 8. College or other courses in machining may be required.
- 可能必需完成学院或其他加工课程。
youdao
- 9. Cylinders after completion of machining on saddle radius.
- 汽缸在完成加工这后在鞍体半径加工后。
youdao
- 10. Otherwise it will affect the normal work of CNC machining center.
- 否则会影响加工中心数控系统的正常工作。
youdao
- 11. Plating, heat treating and machining operations can also be used.
- 仍然可以进行电镀、热处理和机加工作业。
youdao
- 12. Familiar with cost analysis of machining foundry etc. technology.
- 熟悉机加、铸造等加工工艺的成本分析。
youdao
- 13. Follow up new molder machining process and solve all issues on site.
- 跟进新模具的加工流程并解决现场的所有问题。
youdao
- 14. David: What can a machining center do? Can you show me some examples?
- 大卫：加工中心能做什么？你能告诉我一些例子吗？
youdao
- 15. Though small, this part required a number of different machining operations.
- 虽然小，这部分需要一些不同的加工工序。
youdao
- 16. The adjustment, clamping and machining method in finish machining are summarized.
- 总结了精加工时的调整、装夹和加工方法。
youdao
- 17. Position, secure, measure and work metal stock or castings to lay out for machining.
- 放置，保护，测量和操作金属库存或铸件为加工奠定基础。
youdao
- 18. They also must distinguish between corrosion pits, cracks and welded machining repairs.
- 它们还必须能够区分是腐蚀、裂纹还是焊缝修复。
youdao
- 19. How do you decide to choose vertical machining centers or horizontal machining centers?
- 你怎样决定选择立式或是卧式加工中心？
youdao
- 20. Tool condition monitoring is the key technique in automatic and unmanned machining process.
- 刀具状态监测是实现自动化加工和无人化加工的关键技术。
youdao
- 21. The main objective of virtual machining process is to predict and improve machining accuracy.
- 虚拟加工的主要任务是预测和改进被加工件的加工精度。
youdao
- 22. All machine components requiring precision machining shall be part of SELLER's scope of supply.
- 所有要求精密加工的机器部件应该是卖方供应范围的一部分。
youdao
- 23. L Suitable for all machining operations, even the most difficult and demanding broaching machining.
- 适用于所有加工方式，就算是最困难和最苛刻的拉削操作。
youdao
- 24. We are producing machining parts, CNC Precision machining, covering axles, tubes, flanges and others.
- 我们现正制作加工部件，数控精密加工，包括车轴，管，法兰等。
youdao
- 25. The removal of material from a workpiece is termed generation of form by machining , or simply machining.
- 从工件上切除材料被称为机加工成型阶段，或者简称为加工。
youdao
- 26. Therefore, machining technics is complex and requirement is high, which cause the cost of machining is high.
- 因此，传统栅式位移传感器制造工艺复杂，加工要求很高，相应地制造成本也很高。
youdao
- 27. Whether the tool path quality is good or bad will directly affect the machining and the machining cost of part.
- 刀具运动轨迹设计质量的好坏，将直接影响零件的加工质量及加工成本。
youdao
- 28. The quality and efficiency of nc machining mainly depend on the selection of machining strategy and parameters.
- 数控加工的质量和效率在很大程度上依赖于加工方案和加工参数的选取。
youdao
- 29. Holes machining Path Planning is significant to improve the machining efficiency and quality of multi-hole parts.
- 孔群加工路径规划对于提高多孔类零件的加工效率和质量具有重要意义。
youdao
- 30. Holes machining Path Planning is significant to improve the machining efficiency and quality of multi-hole parts.
- 孔群加工路径规划对于提高多孔类零件的加工效率和质量具有重要意义。
youdao
- Good design also takes into account if the machining operations will be easily performed and how the work is held.
一个好的设计要考虑到加工工序是否容易进行及工程如何掌握问题。
用作名词 (n.)
用法讲解
- machining constant 切削常数
- free machining 快削(高速切削)...
- machining center 加工中心,多工序自动...
- machining symbol 机械加工符号...
- machining quality 可切削性
- rough machining 粗加工
- flame machining 火焰表面加工,火焰切...
- machining marks 机械加工痕迹...
- machining operation 机械加工
- machining time 机加工时间
- machining allowance 机械加工余量...
- machining stress 加工应力
- chipless machining 无屑加工
- finish machining 精加工
- spark machining 电火花加工
- machining property 机械加工性能...
- hot machining 高温切嫌工,高温切削...
- supersonic machining 超声波加工
- machining dimension 机械加工尺寸...
- machining accuracy 机械加工精度...
相关词汇
大家正在查
Copyright © 2023 256查询网 All Rights Reserved
