prepreg
英['priːpreg]
美['priːpreg]
- n. 预浸处理(聚酯胶片；半固化片)
双语例句
- 1. The prepreg had been used in helicopter secondary structure.
- 该预浸料已用于直升机次承力结构。
youdao
- 2. The hybrid prepreg substrate (32) is coupled to the base substrate (30).
- 所述预浸渍基材（32）耦接到所述基体基材（30）。
youdao
- 3. The low temperature moulding prepreg technology and it's application are emphasized.
- 本文简介炭集团公司概况，重点介绍低温成型预浸料技术及其应用。
youdao
- 4. Carbon fiber Cloth or fabric and Tape, carbon fabric, carbon fiber sheet, prepreg...
- 又称碳素纤维布，碳纤布，碳布，碳纤维织物，碳纤维带，碳纤维片材(预浸布)等。
youdao
- 5. Prepreg: Shipped to you saturated in resin. You'll need an autoclave to use this. Forget it.
- 饱和树脂。你需要高压设备才能使用它。忘掉它。
youdao
- 6. The loaded surfacer (52) with the carrier (51) is interfacially adhered to the prepreg substrate.
- 所述带有载体（51）的受载表面料（52）交界 粘结到所述预浸渍基材。
youdao
- 7. ACG Group is one of the most famous companies producing prepreg and composite materials in the world.
- 先进复合材料集团公司是世界上生产预浸料和复合材料最有名的公司之一。
youdao
- 8. For the volatile content, the prepreg made by the hot-melt method was lower, generally less than 0.8%.
- 在预浸料挥发分方面，热熔法工艺的较低，一般低于0.8%。
youdao
- 9. Using this device and the method of this invention can improve the width prepreg soakage property greatly.
- 利用本发明的装置和方法可大大改善宽幅预浸料浸润性。
youdao
- 10. Difference of prepreg technique and the tail rotor rigidity were the key resulting in product life decline.
- 预浸料工艺性能的差异及桨叶刚度不足是造成产品寿命下降的主要原因。
youdao
- 11. The storage aging of epoxy prepreg has proud effects on the electrical and mechanical properties of the cured PCBs.
- 储存老化将对环氧预浸料的性能产生显著的影响，进而影响到印刷电路板的质量。
youdao
- 12. In this paper, the technology of carbon fiber reinforced PEEK prepreg produced by melt impregnation is investigated.
- 初步探索了熔融浸渍法制备碳纤维增强PEEK预浸带的制备工艺。
youdao
- 13. The prepolymer blending with AE resin can increase dramatically its toughness and tack of prepreg under room temperature.
- 改性剂a预聚体中加入AE树脂，可显著提高基体韧性和预浸料室温粘性。
youdao
- 14. Good prepreg with stable processing and according with demands can be fabricated by controlling these factors reasonably.
- 通过合理控制这些影响因素，可制备出工艺状态稳定、质量符合要求的预浸无纬布。
youdao
- 15. Changing the layer stack-up style changes the way that the core and prepreg layers are distributed through the layer stack.
- 改变了风格层堆叠的方式改变为核心，预浸料层是通过分布层堆叠。
youdao
- 16. The polyimide resin is suitable for steeping carbon fiber, fiber glass or aramid fiber and the like to be prepared into prepreg;
- 所述的聚酰亚胺树脂适于浸渍碳纤 维、玻璃纤维或芳纶纤维等，制成预浸料；
youdao
- 17. The stitching process was applied to improve the properties in the throughthickness direction of composites based on prepreg materials.
- 采用缝纫工艺对基于预浸料辅层的复合材料进行厚度方向增强，用落球法进行了冲击损伤和冲击后压缩破坏实验。
youdao
- 18. This article studied dry process of PPS prepreg which is impregnated with slurry method through the use of orthogonal experiment method.
- 本文采用正交试验设计法，成功地筛选出聚苯硫醚(PPS)泥浆干燥工艺参数。
youdao
- 19. For requirement of placement ability of trajectory, the reason of prepreg distortion is analyzed and the influence of it is also discussed.
- 基于轨迹的可铺放性要求分析了铺放过程中预浸料产生畸变的原因及影响轨迹可铺放性的因素。
youdao
- 20. Was installed at the same time to cut and kit the prepreg, which significantly reduced material waste and helped optimize material throughput.
- 这在很大程度上减少了原材料的浪费，有助于原材料得到最大限度的利用。
youdao
- 21. And the increasing of prepreg tack can significantly improve the lateral bending performance, which all agree with theoretical prediction well.
- 增加预浸料黏附力可显著提高其侧向弯曲性能，符合理论分析结果。
youdao
- 22. The resin blend has been heated to a temperature substantially greater than 225 degrees Celsius in a curing process when preparing the prepreg.
- 当制备该半固化片时，所述树脂掺合物在固化程序中经加热至实质上高于摄氏225度的温度。
youdao
- 23. Microcapsule-type curing agent, method for producing the same, thermosetting resin composition, prepreg and fiber reinforced composite material.
- 微胶囊型固化剂，其制备方法，热固性树脂组合物，预浸渍物及纤维增强的复合材料。
youdao
- 24. The properties of plain carbon fabric prepreg were researched using a picture frame shear rig which is (installed) on a mechanical test machine.
- 利用安装在拉伸试验机上的像框剪切装置，研究了平纹预浸碳纤维机织织物的剪切行为。
youdao
- 25. The results show that the lateral bending performance of prepreg increases with the increasing of temperature, pressure, and decreasing of speed.
- 结果表明：随着温度增大、压力和速度减小，预浸料的侧向弯曲性能提高；
youdao
- 26. In this paper the survey of ACG Group is briefly introduced. The low temperature moulding prepreg technology and it's application are emphasized.
- 本文简介炭集团公司概况，重点介绍低温成型预浸料技术及其应用。
youdao
- 27. It would be difficult with complex shape to use prepreg mat or RTM process without having resin-starved or resin-rich area, compromising performance.
- 以传统的预浸布或树脂转注成型来说，要避免树脂过多，或是树脂缺乏区域，甚至在成品性能上妥协，是一件困难的事。
youdao
- 28. The experiment results show that ultrasonic cutting technique is an effective, clean and controllable method for machining of carbon fibre prepreg. $
- 实验结果表明，对于纤维预浸料的切割与下料，超声切割技术是一种可获得高质量、高效率的加工方法。
youdao
- 29. The review shows the technical points of(epoxy) hot-melt prepreg on the(reasonable) combination of resin matrix, matching of curing agents and(accel…
- 表明环氧树脂热熔预浸料研制的技术关键是选择合理的树脂体系组合，有较长潜伏期的固化剂和促进剂的匹配及合适的催化剂。
youdao
- 30. Tests were also carried out in composite manufacture, in which the fiber optic refractive sensors were embedded in the prepreg during the cure process.
- 在实验室与生产现场两种条件下将光纤折射率传感器埋设于预浸料中对其固化工艺过程进行了监测。
youdao
用法讲解
- ablative prepreg 烧蚀性预浸料...
- epoxy prepreg 环氧树脂预浸料...
相关词汇
大家正在查
Copyright © 2023 256查询网 All Rights Reserved
