reheating
英[riː'hiːtɪŋ]
美[riː'hiːtɪŋ]
- n. 重新加热
详细释义
动词 reheat:
-
heat again
双语例句
- 1. Then there is reheating furnace, reducing mill and cooling table.
- 然后进入再热炉、减径机和冷却床。
youdao
- 2. Reheating furnace is an important heat device in steel tube production.
- 再加热炉是钢管生产中主要的加热设备。
youdao
- 3. The service life of the reheating furnace has been prolonged when it was used.
- 通过在轧钢加热炉上的喷补实践,较大地延长了加热炉的使用寿命。
youdao
- 4. Mathematical Model for delay process of a reheating furnace is studied in this paper.
- 本文对加热炉待轧过程进行了数学模型的研究。
youdao
- 5. Fruits and salads are most healthy as they don't require reheating and maintain nutrition.
- 水果和沙拉是最健康的,因为它们不需要加热,同时还能保证营养不流失。
youdao
- 6. The reformation of side discharge roll table of continuous reheating furnace is introduced.
- 介绍了端出料连续式加热炉炉头辊道的改造。
youdao
- 7. When reheating food, check it's piping hot in the middle and don't reheat it more than once.
- 当再加热食品,检查它的热管道,在中东和不再热,这一次以上。
youdao
- 8. The practical production show that the converter gas can be used in reheating furnace of steel rolling.
- 实践证明,轧钢加热炉使用转炉煤气是可行的。
youdao
- 9. An overview of the induction reheating technique for SSM billet is introduced and analyzed systematically.
- 对半固态坯料二次感应加热技术进行了较为系统的介绍和分析。
youdao
- 10. The movement of slabs in reheating furnace from two-strand thin slab continuous caster operations is discussed.
- 讨论了两流薄板坯连铸连轧作业时铸坯在加热炉内的运动情况。
youdao
- 11. Some negligence in design about discharge method of reheating furnace limit the speed and the output of PQF mill line.
- 由于再加热炉出料方式设计上的原因,限制了PQF轧机生产线的轧制节奏,从而影响产量。
youdao
- 12. You might need to add a couple more minutes, but it's better than having to waste energy by reheating an oven multiple times.
- 您可能需要多用上点时间,但这好过您使用多次而浪费更多的能源。
youdao
- 13. The requirement to flow, pressure, heating temperature and purity of converter gas used in reheating furnace were introduced.
- 介绍了加热炉在使用转炉煤气作为燃料时,对其流量、压力、加热温度和纯洁度的要求。
youdao
- 14. This paper introduces emphases, difficulty and countermeasure in the construction of pusher type continuous reheating furnace.
- 阐述中厚板推钢式加热炉施工中的重点、难点问题以及解决方法。
youdao
- 15. This paper introduces new a kind of type structure of energy conservation reheating furnace, analyses the function characteristic.
- 介绍了一种新型节能加热炉的结构形式,并对其性能特点进行了分析。
youdao
- 16. This paper described the application of double cross limiting range combustion control system in the walking beam reheating furnace.
- 介绍了双交叉限幅燃烧控制系统在唐钢步进式轧钢加热炉上的应用。
youdao
- 17. This paper introduces that the combustion technology of coal-water-slurry (CWS) can be applied successfully to the reheating furnace.
- 本文研究了水煤浆燃烧技术在轧钢加热炉上的应用,并获得成功。
youdao
- 18. This paper introduces two transformations for perfecting chain grate reheating furnace and the effects of automatically firing steel.
- 本文介绍了锡兴钢铁公司,为完善链式炉排加热炉所做的二次改造和实现自动烧钢的做法及效果。
youdao
- 19. In addition, the writer studies optimize control based on intellect predicting of temperature field of reheating furnace iron bodies.
- 另外,作者还对基于钢坯温度场智能预报的加热炉最优控制进行了研究。
youdao
- 20. At present, the chain grates have been extensively applied to medium-and small-size coal-fired reheating furnace, and good effects achieved.
- 目前,链式炉排已广泛地应用于中小型燃煤加热炉,并取得了可喜的成果。
youdao
- 21. The blast furnace gas as fuel of high temperature reheating furnace is an important technology for energy-saving and environmental protection.
- 高炉煤气作为高温加热炉单一燃料是节约能源和改善环保的重要技术措施。
youdao
- 22. In this paper, PCA and statistical control chart have been used to detect process operating faults on an industrial rolling mill reheating furnace.
- 针对轧钢加热炉这类典型的工业生产过程,运用多元统计投影技术进行了故障检测与诊断的研究。
youdao
- 23. Has deep knowledge of aluminum industry furnace, such as automobile compound industry casting melters, reheating and melting furnaces for al slab process.
- 对铝加工行业的工业炉有深刻的知识,有在铝汽车零部件铸造的熔化炉,铝加工行业加热炉,熔化炉工作的经验。
youdao
- 24. Slabs are heated in reheating furnaces and rolled to the required thickness in hot-rolling mills. The final product is flat steel in coils and thick plates.
- 将板坯置入加热炉内加热,并在碾轧机上轧成所需的厚度。最终产物是介于线圈和厚板之间的产品-扁平钢板。
youdao
- 25. The heat flux to slab surface of a walking beam reheating furnace along length of the furnace is computed, and total heat exchange factor is also calculated.
- 以某轧钢厂的一台步进梁式加热炉为例,计算了钢坯表面热流沿炉长方向的分布,并反算求解总括热吸收率。
youdao
- 26. The heat flux to slab surface of a walking beam reheating furnace along length of the furnace is computed, and total heat exchange factor is also calculated.
- 以某轧钢厂的一台步进梁式加热炉为例,计算了钢坯表面热流沿炉长方向的分布,并反算求解总括热吸收率。
youdao
相关词汇
大家正在查
Copyright © 2023 256查询网 All Rights Reserved