sintering
英['sɪntərɪŋ]
美['sɪntərɪŋ]
- n. 烧结
- 动词sinter的现在分词形式.
详细释义
动词 sinter:
-
cause (ores or powdery metals) to become a coherent mass by heating without melting
双语例句
- 1. Instead, "sintering" or "firing" is the process typically used.
- 作为替代，一般采用“烧结”或“焙烧”工艺。
youdao
- 2. After compaction the components pass through a sintering furnace.
- 零件压实后通过烧结炉。
youdao
- 3. Spark plasma sintering (SPS) is a new process of rapid sintering.
- 放电等离子烧结(SPS)是一种快速烧结新工艺。
youdao
- 4. His team at Loughborough University has invented a high-speed sintering system.
- 在Loughborough大学，他的团队已经创造了一套快速烧结系统。
youdao
- 5. Ceramic elements are made by pressing and sintering finely powdered materials.
- 陶瓷元件是将仔细研磨的材料经过加压和烧结制成。
youdao
- 6. Ceramic elements are made by pressing and sintering finely powdered materials.
- 陶瓷元件是将仔细研磨的材料经过加压和烧结制成的。
youdao
- 7. Sintering Machine design paperless design will greatly reduce the workload of workers.
- 烧结机的无纸化设计将大大减轻设计工作者的工作量。
youdao
- 8. Casting sintering is a new technique by which iron-based surface composites are produced.
- 铸造烧结法是一种制备铁基表面复合材料的新工艺方法。
youdao
- 9. Effect of sintering temperature and sintering holding time on green density was analyzed.
- 分析了烧结温度和烧结保温时间对压坯密度的影响。
youdao
- 10. A temperature control system which is adapted for sintering furnace of semiconductor is introduced.
- 介绍一种适用于半导体烧结炉的控温系统。
youdao
- 11. Temperature effect on the desulfurization of sintering process is investigated by mini-sintering test.
- 用烧结饼微型试验法研究了温度对烧结过程脱硫的影响。
youdao
- 12. CrMnN steel casting is the key for sintering machine to produce sintering mine in metallurgy enterprises.
- 铬锰氮钢铸件，是冶金企业生产烧结矿用烧结机中的易损重要备件。
youdao
- 13. Hot pressed sintering can shorten sintering time and be beneficial to attain nano grain size sintering materials.
- 热压烧结可以缩短烧结时间，有利于获得晶粒保持纳米尺度的烧结体材料。
youdao
- 14. Therefore, these results prove that crystal formation interferes with the sintering process of a crystalline frit .
- 所以这些结果证明晶体结构干扰结晶弗里茨的烧结过程。
youdao
- 15. A process that metallic parts are fabricated through selective laser sintering (SLS) prototype parts is researched.
- 主要研究了通过选择性激光烧结高分子原型件制造金属零件的工艺。
youdao
- 16. Sintering densification process is one way to manufacture P/M for producing tool steel products with high properties.
- 烧结致密法是制取高性能粉末冶金工具钢制品的一个途径。
youdao
- 17. Usually, layer and vertical crack are caused by moulding, and horizontal and reticulate crack are caused by sintering.
- 通常层裂和竖向裂纹是机压所致，横向裂纹和网状裂纹是烧成造成的。
youdao
- 18. The density of the component can also change during sintering, depending on the materials and the sintering temperature.
- 根据材料和烧结温度的不同，零件的密度在烧结过程中也会改变。
youdao
- 19. After softening resin and ultrafiltration and sintering charcoal water, can direct drinking cooking, soup, tea and so on.
- 经过软化树脂和超滤以及烧结炭的水，可直饮煮饭，煲汤，泡茶等。
youdao
- 20. The selection of the sintering parameters has effect on the mechanical properties of the sintering materials to some extent.
- 烧结参数的选择对烧结材料的力学性能有一定的影响。
youdao
- 21. In sintering, ceramic powders are processed into compacted shapes and then heated to temperatures just below the melting point.
- 在烧结过程中，陶瓷粉末先挤压成型然后加热到略低于熔点温度。
youdao
- 22. The experiment indicated the nickel electrode by sintering in atmosphere can be possible to form the good ohm contact with PTCR.
- 实验表明空气中烧渗镍电极可以和PTCR形成良好的欧姆接触。
youdao
- 23. WC powders prepared at higher temperatures are characterized by complete sintering, coarse substructure and slight micro-strain.
- 在高温下制取的wc粉，结晶完整，晶内亚结构粗大，微观应变小。
youdao
- 24. Abstract: the sintering pot tests with addition of Indian iron fine ore were conducted under the material condition of Chonggang.
- 文摘：就重钢烧结原料条件下配加印度多尼矿替代部分澳矿进行了试验室研究。
youdao
- 25. In order to attain nano grain size sintering materials, we must control strictly not only sintering temperature but also sintering time.
- 欲获得纳米尺度晶粒的烧结体材料，不仅需要采用远低于其常规的烧结温度，对烧结时间亦应严格限制。
youdao
- 26. The processes of rapid forming solid parts by laser sintering ceramic powder include laser sintering and second sintering post treatment.
- 激光烧结陶瓷粉末快速成型三维零件的过程包括激光烧结和二次烧结后处理两个步骤。
youdao
- 27. The processes of rapid forming solid parts by laser sintering ceramic powder include laser sintering and second sintering post treatment.
- 激光烧结陶瓷粉末快速成型三维零件的过程包括激光烧结和二次烧结后处理两个步骤。
youdao
- Shanxi's Datong with the sintering plant Steel Ltd.
山西大同同嘉钢铁有限公司烧结厂。 - High-purity low Cordierite is produced by sintering.
应用烧结法成功地合成了高纯度低温堇青石。
用作名词 (n.)
相关词汇
大家正在查
Copyright © 2023 256查询网 All Rights Reserved
